DCF77-Clock 4465
DCF77-Clock 4465 |
|
System versionDCF77-snap-in module for rail installation.
The electronics are placed in a snap-in module made of aluminium.
The voltage supply (18-60 V DC) and the 3 pulse outputs are connected
by screw terminals. Signals of the serial interface (RS232, RS422) are led
to a 9-pole SUB-D connector.
The module is fixed to the rail by means of a snap-in mechanism.
The software, which runs under MS Windows (3.x, 95/98, NT,
2000, ME)
for the configuration and setup is included in the delivery.
As an option you can order the following interface configuration:
| Receiver: | see DCF77-Info |
| Voltage: | 18-60 Volt DC / 2.5 VA |
| Housing: | measurements 65, 105, 130 mm (WxHxD) |
| Interfaces: | serial interfaces with RS232 and RS422 hardware, baudrate 150-19.200, data bit, stopbit, parity, various data strings, DCF77-simulation 77,5 kHz, 3 programmable optically isolated pulse outputs, periodic, non-periodic pulses, system information |
| Supplied: | snap-action module FG687000, GPS-antenna with 10 m cable, configuration software for the setup (Windows 3.x, 95, NT) PC-adapter cable length, documentation |
Current manuals in english and german language and remote/service software resp. driver for our systems can be found in the download area:
|
+++ selection+++ |
||
|
|
||
