GPS-Clock 6038
GPS-Clock 6038 |
|
The radio controlled clock 6038 can be used worldwide as time standard in PCs with ISA or EISA-bus interfaces.
The board is plugged directly into a free plug-in space of a IBM PC-XT/AT or compatible computer. It serves to synchronize different operating systems (see option). It is mainly used in operating data recording, time recording or personnel data systems. The stable operating frequency with the possibility to release time synchronous interrupts and the direct access to the 1/1000 sec., make its use very interesting for the immense field of calibration, measuring and process engineering.
The clock is shown on the right of the picture
(short 8-bit board 100 x 160 mm).
The board also has an RS232 interface and pulse outputs, which are fed to the front panel of the board via a 9-pole SUB-D connector.
A PC software (DOS) for the setup is supplied. The clock is delivered with driver programmes for DOS and Windows (3.x, 95/98, NT, 2000, ME). All other software drivers can be picked up here in the download directory.
| Receiver: | see GPS-Info |
| Additional interfaces: | independent serial interface with RS232 hardware, DCF77-simulation as TTL pulse, different pulse outputs as TTL signals |
| Parameter of the serial interface: | baudrate, stopbit, parity, structure of data string etc. can be set by means of supplied software or serial interface |
Current manuals in english and german language and remote/service software resp. driver for our systems can be found in the download area:
|
+++ selection+++ |
||
|
|
||
