Interface Board 6841H1/H2/H3

hopf Elektronik GmbH

The board contains several functional modules for different potential adaptations and also for the output of individual information like second pulses, DCF77-pulse signal etc.

Three different extension levels are available:

Board 6841H1

On this level the board contains the following functional modules:

All the signals are led to a 25-pole SUB-D female connector.

Board 6841H2

This extension level contains all the functional modules of the board 6841H1. Additionally the board contains a converter from RS422 signals to optical fiber for synthetic cables.

Board 6841H3

This extension level contains all the functional modules of the board 6841H1. Additionally the board contains a converter from RS422 signals to optical fiber for glass fiber cables.

 


Technical Data

voltage supply: 5 V DC ± 5%
power consumption: max. 0.5 A
temperature range: 0 - 70°C
output voltage: 24 V DC / 60 mA

 

TTY-interface
voltage difference: max. 30 V DC
output current TTY-OUT: max. 25 mA
input current TTY-IN: max. 25 mA, min. 10 mA
baud rate: max. 9600 Baud
signal delay at I = 20 mA, 1 m cable length, 90% / 10% signal amplitude
- contact closing time: 1 µs
- contact opening time: 1 µs

 

optical coupler
voltage difference: 80 V DC
switching current: 50 mA
signal delay at I = 20 mA, 1 m cable length, 90% / 10% signal amplitude
- contact closing time: 30 µs
- contact opening time: 5 µs

 

relays
contact load: max. 80 V, 30 VA

 

fiber optic
baud rate: max. 9600 Baud
optical transmission length
- plastic cable: max. 80 m
- glass fibre cable: max. 500 m

Download Manuals

6841Hx.pdf Manual English/German

 


homepage

+++ selection+++

top

© by hopf Elektronik GmbH  -  Nottebohmstr. 41  -   D-58511 Lüdenscheid  -  E-Mail: support@hopf.com